Different Types of Tube Bending

by Peter Angelico on Feb 17, 2020 Business 51 Views


Tube bending plays one of the most important parts in fabrications in Australia. Tube bending is any metal forming process used to form pipes or tubing permanently. It is a critical science, and many approaches are used for getting results. There are so many products manufactured using tubing it would be somewhat impossible to list them all.

Here are a few types of pipe tube bending.

1. Wiper Dies

In extreme situations, when a thin tube needs a tight bend, a wiper die may be needed. The wiper is inserted into the grove between the tube and the bending die to prevent a wrinkle defect due to uneven internal wall compression.

2. Mandrel Functions

A Mandrel is less a method of tube bending and more an aid to pipe bending in Australia. As a piece of tube is bent, the external wall of the tube necessarily thins. This comes with a tightening of the bend radius and an increased chance of a flattened bend. To counter this, a device called a mandrel sometimes put inside the tube at the point of the bend. This offers support and increases the chance of getting the desired shape when bending.

3. Roll Bending

Roll bending can be good for circular fabrications, such as wheel rims.

It involves the use of a machine with three rollers, called a jig. Roll bending can be used to bend both metal bars and sheet metal. It works by putting the bar into the jig and manually lowering and pressing the middle roller against the bar. As the rollers are rotated, the bar moves along, and force is applied to the bar as it goes back and forth along the rollers until it reaches the desired shape.

4. Rotary Draw Bending

Rotary draw benders allow for more specific jobs and are used to bend tube and pipe for products like roll cages, handrails, and handles. And so it is called as a more precise type of bending. This type of bending uses a rotary draw machine that bends the metal through a series of die sets with a consistent centre line radius.

5. Press Bending

Press bending is one of the easiest and most common types of tube bending. This process involves pressing a “bend die” against the pipe to force it to conform to the shape of the bend.

No matter whether you in search of safety railing systems or industrial handrails in Australia for your warehouse, contact the leading bender and hire for the quality service.

The author of this article specialises in pipe bending Australia. In this article, he discusses the different types of tube bending. To learn more, visit https://www.abeckgroup.com.au/

Article source: https://article-realm.com/article/Business/5129-Different-Types-of-Tube-Bending.html


No comments have been left here yet. Be the first who will do it.

captchaPlease input letters you see on the image.
Click on image to redraw.



Overall Rating:

Most Recent Articles

Latest Comments

Nice Article.  Are you looking for the best Google Adwords Services in Chennai ?  We are Branding Pilot's top SEM Service in Chennai . Stop waiting further and join us! Start Increase your Sale....
Hope you enjoy our Beer Tour Long Island   Article !
on May 28, 2020 about Enjoy Long Island Beer Tours
Very nice indeed.
Garmin express - Garmin express is a software application and manage all the garmin     
Hi Nancy, I was doing some research on CBD products and I cam across your great review on CBD patches.  I coudln't help but notice that you mentioned Nano 101. It seems as though they have...