AC1200 WiFi Mesh Extender Setup

by Mywifiext Local on Jul 21, 2020 Hardware 41 Views

One of the finest WiFi Extender in the market is AC1200 Mesh WiFi Extender. This device is built to avoid interruptions in internet usage and increase the coverage area of your existing wifi network noticeably this device is used. This device is attached to the router to attain a boosted connectivity with a broader coverage area. It supports dual band connection and increases the Wifi speed up to 1200 Mbps. It also supports new 802.11ac.11ac &b/g/n WiFidevices. It can be easily installed via WPS or via

Connect AC1200 with WPS

  • Connect the extender to a power supply, and place it in the same room where the router is placed.
  • After plugging the Extender, wait for the Power LED to light green. If the Power LED does not light, press the Power On/off button on the side of the extender.
  • Now press the WPS button placed on the extender, the WPS LED will blink.
  • After two minutes, press the WPS button on your router. As the extender connects to your existing WiFi network, you will find the WPS LED on the extender turns solid green and the Router LED lights.
  •  If the Router LED does not light, try once again. If it does not light even then, go to the other side of this quick start guide. AndConnect With the NETGEAR Installation Assistant
  •  If your WiFi router supports the 5 GHz band, then reconnect your extender to the power supply and press the on/off button, and connect the extender to the 5 GHz band.
  • Unplug the extender and take it to some other part of your room that is about halfway from your router and where the wifi signal is very poor.The location that you choose must be within the range of your existing WiFi router network.
  • Plug in your extender into an electrical outlet and wait for 2 minutes, till the Power LED light green.
  • With the help of the Router LED make sure where the extender and the router connection is within range.
  • Keep plugging the extender into an outlet closer to the router until the router led lights change amber green.
  • Now test your extender by moving your computer or mobile device to the place where you receive poor WiFi signals.

Mesh Extender Web Installation

  • Put on your computer or mobile device, click the WiFi connection manager and locate NETGEAR_EXT. The Extender LED lights, as soon as you are connected to the extender.
  • Launch a web browser.
  • Visit mywifiext
  • Installation page will be displayed.
  • Enter the login page and fill in your default username and password.
  • Move ahead as prompted. As you are connected the extender at mywifiext led light would turn amber green.
  • If not then restart by pressing the restart button places on the extender.
  • Now repeat the process after waiting for seven minutes.
  • Once you are connected shift your computer or mobile to the place where you receive poor WiFi signals.
  • Remember always try to keep the extender and the router within range in the same room itself.
  • Keep the browser updated.

Note:One significant criteria of this extender is that it’s dual band and can be connected to two wifi networks.

Although the installing process of is not very complicated but still you may get some error messages which can be handled easily by our customer care experts. The Mesh extender is specially designed by our experts to resolve all the issues regarding poor WiFi signals, coverage area and slow network. This Ac 1200 mesh Extender provides excessively smooth running of internet and increases the range of the Wifi connection to a huge area. This gives you the freedom of gaming surfing and watching videos sitting at your favorite corner of your house.


Article source:


No comments have been left here yet. Be the first who will do it.

captchaPlease input letters you see on the image.
Click on image to redraw.



Overall Rating:

Most Recent Articles

Latest Comments

Hi, I read your post and found it quite interesting. The post you shared is very unique and informative. Thanks for sharing such a useful post. For more information visit on
Well, i didn't know about it before. Thanks for sharing. I really liked it. Home Exchange
on Sep 14, 2020 about Print Your Pet Photos on Canvas
Thank you for sharing this article.
Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big...
on Sep 8, 2020 about Print Your Pet Photos on Canvas
I did not know the entire benefits of Garmin Nuvi Map Update . But since I have read this blog on map update, I have installed all available updates for my garmin device. I must say that this...