Netgear Extender Setup And how to Reconnect o Home Network.

by Mywifiext Local on Jul 21, 2020 Hardware 39 Views

The Most powerful device which increases the range of your wifi network and provides you boosted connectivity is our Netgear Extender . We connect the mywifiext Extender to our computer through a router by two means Firstly by WPS and next is via web address We just have to press the WPS button on the router and the extender one by one within a time between no less than 2 min. And wait for the led light turning green and we are connected.

To Setup a New Netgear Extender

  • Using an Ethernet cable connect your range extender to your computer.
  • Launch any web browser in your computer and type htpp://
  • Press enter key and search for the login page.
  • Enter your default username and password ie: username-admin and password-password.
  • Go to login and press enter.

Select the setup key and go to the Wireless setting option. Now once you are all set to setup you have to go through a verification process and check whether the network key password i s the same that of your router. If it does not match than change the password and apply. Now here we have to reconnect our Wifi Extender. The process is much easier.

Process to Reconnect Wifi extender through Wifi

  • Press and hold the factory setting button on your extender for seven seconds.
  • Now put on your computer or mobile device and move to the wifi menu.
  • Now connect the default wifi network, NETGEAR_EXT.
  • Open a web browser in your connected device.
  • Go to the address bar and type
  • Press enter and get inside the login page.
  • Enter default username (admin) and password (password).
  • Click login.
  • Follow the instructions to reconnect your extender.

This is the simple way you can reconnect your extender to your home network. Still there is another minor issue that if your router uses WEP security them may be your extender cannot be reconnected.  In that case enter the network name (SSID) and password when asked.

How to reset using Factory Reset Button

  • Check the power light of the extender it must be on.
  • Now find out the factory reset button on the extender.
  • It’s usually located on the back, bottom or side panel.
  • Press and hold the reset button for seven seconds.
  • You can do it with the help of a paper clip or similar object.
  • As soon as you release the factory setting button your extender gets reset.

In some models the mywifiext extender has to be reset by web interface. For this you have to login to the extender through web browser and go to menu. Click menu icon . As the menu page displays go to the settings and press enter. Now click ‘other’ and a reset screen appears. Press ok or press enter and your reset is done. So whenever you stuck somewhere while the setup process of your extender or while logging via you can reset extender and start a fresh. You can also take the help of the reset process if sometimes your Computer OR mobile device s hanged or internet connection drops.

Article source:


No comments have been left here yet. Be the first who will do it.

captchaPlease input letters you see on the image.
Click on image to redraw.



Overall Rating:

Most Recent Articles

Latest Comments

Hi, I read your post and found it quite interesting. The post you shared is very unique and informative. Thanks for sharing such a useful post. For more information visit on
Well, i didn't know about it before. Thanks for sharing. I really liked it. Home Exchange
on Sep 14, 2020 about Print Your Pet Photos on Canvas
Thank you for sharing this article.
Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big...
on Sep 8, 2020 about Print Your Pet Photos on Canvas
I did not know the entire benefits of Garmin Nuvi Map Update . But since I have read this blog on map update, I have installed all available updates for my garmin device. I must say that this...