Surfing

FrSky Xact series coreless servos utilize all CNC machined aluminum protective case and metal gears, these servos are 8.4V high voltage capable and offer high speed and configurable torque performance. Also, the Xact series servos offer multiple form factors and configurations to fit for different model types and precision usage.   Working with the F.Port 2.0 protocol, the telemetry data (like real-time current and voltage) of Xact servos can be achieved and transmitted back to the radio by connecting either F.Port 2.0 capable receiver or flight controller. All the preset servo options of speed and torque can be configured directly on an ACCESS radio through the host device of F.Port 2.0 line, and the configurable servo steering as well as travel degree are additions now can be expected on this series.   FEATURES   Supports F.Port 2.0 SBUS and PWM protocol High durability with metal gear and all-aluminum CNC machined protective case 8.4V high voltage capable operation ... Continue reading →

All of the Archer receivers are hyper-matched with the ACCESS protocol. They not only feature wireless firmware upgrades, increased range, and telemetry performance, the R4 now supports more functions like configurable telemetry power, S.Port/F.Port switching and FLR output. Additional valuable features are under development to unlock the true potential of the ACCESS protocol.   FrSky RECEIVER FEATURES：   ACCESS protocol with Over The Air (OTA) Tiny and lightweight Supports signal redundancy (SBUS In) Full control range with telemetry S.Port / F.Port External battery / device voltage detection   SPECIFICATIONS：   Dimension: 30*17*6.2mm(L*W*H) Weight: 3.8g 16/24 Configurable SBUS Channels 4 High-precision PWM Channels Operating Voltage Range: 3.5 -10V Operating Current: ＜60mA@5V Control Range: Full range* with telemetry (*Full Range: ＞2km, range may vary based on local conditions.) Voltage Measurement Range via AIN2 (External device): 0-3.3V Compatibility: All FrSky ... Continue reading →

The V8R4-II lightweight receiver is a great fit for small Park Fliers, 3D foamy and indoor slow flyers. Weighing in at a scant 3.5 grams, this is the perfect receiver for these types of applications. This receiver will operate as normal with your Telemetry module without having to switch over to none telemetry mode. Also compatible with the none telemetry modules - as well as with both the TARANIS TX and the XJT module too.   FrSky Receiver Features:   Advanced Continuous Channel Shifting Technology ( ACCST SYSTEM), robust frequency agility. Easy to bind and very fast link-up. Excellent reboot times. All channels are very effective and easy to set failsafe. Responsive and rock-solid in performance.   Specifications: Number of Channels: 4 Dimension: 36mm x 17.5mm x 8mm Weight: 3.5g Operating VoltageRange:3.0V-16.0V Operating Current: 30mA@5V Compatibility:   All 16 channels require the FrSky Taranis,or the XJT module. For 8 channels in D8 Mode you can use the FrSky ... Continue reading →

The 900MHz R9 MM-OTA receiver implements the ACCESS protocol and brings the user improved performance and features. The long range receiver supports wireless firmware updates over the air making binding to receivers even easier. As well as the convenience of checking the current receiver firmware version. The R9 MM’s compact form factor design is also carried over to the OTA version, and the R9 MM-OTA supports inverted S.Port as well.   This receiver works compatible with the new release R9M Lite Pro module,and the other 900MHz modules will also be supported when the ACCESS firmware is available.   SPECIFICATIONS：   Dimension: 16*10*2.8mm (L×W×H) Weight: 0.7g (without antenna) Number of Channels: Non-LBT Version: 4/16CH (Telemetry) LBT Version: 4/16CH (Telemetry) / 4/16CH (No Telemetry) Operating Voltage Range: DC 3.5V – 10V Operating Current: 100mA@5V Operating Range: Up to 10km or above Compatibility: R9M Lite/R9M/R9M 2019 with ACCST firmware ... Continue reading →

This is going to be the 2nd Part of the Recommended Battery Series for FrSky Transmitter X9D Plus Transmitter. Don’t get confused with the title that FrSky X9D 2019 requires different batteries than x9d plus as you might think there are some changes in the battery compartment of it. But that is not the case. in fact, the battery compartment of X9d 2019 is exactly the same as of old Taranis X9d Plus.   However, there is a special reason why this article is focused on Taranis X9D Plus 2019 rather than focusing on X9d plus in general. It is because X9D 2019 only supports operating voltage between 6.5v to 8.4v, which is basically a 2S lipo or Li-Ion. But, the older x9d plus (SE also) supports a wide range of operating voltage between 6 to 15V which means it can support even a 3s Lipo or Li-ion.   FrSky Taranis X9D 2019 has also some other difference with older Taranis X9D when it comes to battery and charging. Older Taranis X9D plus has a Ni-Mh battery charging circuit ... Continue reading →

The FrSky Pilot series flight controller is an All-in-One module that supports comprehensive flight control functions with pre-installed powerful INAV (The support of other open-source software like Ardupilot and Betaflight are ongoing.) and F.Port 2.0 software. This control system is targeted towards RC hobby enthusiasts who are looking for a complete system combining power management, a powerful graphic FrSky OSD, and plenty of IOs. The R9/RXSR Pilot is comprised of a three-layer stack: 1.A mainboard providing power for servos and for a video system with switchable voltages, current measurement and general connectivity (6 full UARTs, I²C, 12 servo/motor outputs, 2 analog inputs, video input/output) 2.A processing board using a powerful STM32F765 at its core, boasting 1MB of flash memory, and 512KB of RAM capable of running the INAV, Ardupilot and Betaflight flight control software. It integrates an ICM20602 IMU, FrSky’s latest graphic FrSky OSD , and an SPL06 high ... Continue reading →

The ARCHER GR8 FrSky receiver features the new ACCESS protocol. ACCESS provides the lower latency and increased performance of our previous G-RX8 receivers. With OTA (Over-The-Air) function support firmware upgrades will be very easy, no more wires. The ARCHER GR8 also has an upgraded high precision variometer that gives pilots more accurate and quicker altitude and vertical speed data. Now you can enjoy more accurate and quicker vario audio feedback from your FrSky ACCESS enabled transmitter. The ARCHER GR8 maintains its small form factor. Thanks to the ACCESS protocol and hardware optimizations, you can now use 8 high-precision PWM channels and 16 SBUS channels via standard servo connectors at the same time. In addition, any SBUS equipped ACCESS receiver can be connected to the SBUS IN port turning it into a redundant receiver, the GR8 will automatically use the receiver with the best signal. Powering the receiver via a speed control? Simple battery voltage monitoring is now ... Continue reading →

The Archer R8 PRO has 8 high-precision PWM channel outputs and features excellent Anti-interference performance when it comes to spark-ignition on internal combustion models.  It supports full-range signal strength with dual detachable antennas that assure optimal antenna reception and maximum range. In addition to all this, the R8 Pro can also be used as a redundancy receiver along with any other FrSky ACCESS capable receiver equipped with a SBUS port. All of the Archer receivers are hyper-matched with the ACCESS protocol. They not only feature wireless firmware upgrades, increased range, and telemetry performance, the R8 PRO now supports more functions like configurable telemetry power, S.Port/F.Port switching and FLR output. Additional valuable features are under development to unlock the true potential of the ACCESS protocol. FEATURES： ACCESS protocol with Over The Air (OTA) Anti-interference in spark-ignition Supports signal redundancy (SBUS In) Full control range with ... Continue reading →

Get an amazing coffee bottle collection at your office. This would enable productivity, energy, and enthusiasm among your employees. In short, for smart work at a full-speed in your office premises, you need a smart collection of the coffee bottles. These are easier to choose. You simply need to get going with the criteria mentioned below for purchasing the best coffee bottle collection. Real-time temperature display The smartest bunch of coffee bottle collection would have the latest HD LCD screen. It depicts the right temperature of the coffee stored inside. It lets you know whether the coffee inside right now is best for you to drink or not. This helps the consumers of the coffee in your office know the best-case scenarios of drinking in advance. This way, no would be falling ill unnecessary when the weather changes. They would know the temperature of the coffee inside the container. Then they can heat or let the coffee be cold as per their preferences and room temperature. ... Continue reading →

This pandemic has made the temperature measurement mandatory. A person having a temperature may catch with SARS-CoV-2 infection. Also, mild or severe fever is one of the symptoms of COVID-19. Since it is not possible to keep the businesses or market places, halt until this pandemic ends, but working can be done with safety measures.      The trend of temperature measurement with facial recognition has been capturing the market. It is a process wherein no physical touch is done. The measurement of temperature is checked via the face recognition equipment. Also, Kiosk with Facial Recognition has designed uniquely, which gives no-touch access and quickly place in anywhere. About temperature Measurement Kiosk with Facial Recognition Since it is no touch access temperature measurement equipment, thus it must be placed at somewhere. Fortunately, Kiosk with Facial Recognition has available in four versions- Infrared, Wall Mount, Desktop, and Pedestal with or without ... Continue reading →