
Steel pipes can be divided into two categories: seamless steel pipes and welded steel pipes according to the manufacturing method. Among them, ERW steel pipe is the main variety of welded steel pipe.
Oil casing pipe refers to the steel pipe used to support the well wall of oil and gas wells to ensure the normal operation of the entire oil well during the drilling process and after completion. There are two main types of steel pipes commonly used as raw materials for petroleum casing: Seamless Casing and ERW Casing. So, what's the difference between the two? Let's analyze and compare in detail below.
Seamless casing - casing made of seamless steel pipe as raw material
Seamless pipes (SMLS) refer to steel pipes manufactured by four methods: hot rolling, cold rolling, hot drawing, and cold drawing. The pipe body itself does not have any welds.
ERW casing - casing made of electric welded pipe as raw material
ERW (Electric Resistance Welded) pipe refers to a straight seam welded pipe manufactured through high-frequency resistance welding process. The raw material steel plate (coil plate) of ERW welded pipe is made of low carbon micro-alloy steel rolled by TMCP (Thermo-Mechanical Control Process).
1. Outer diameter tolerance
Seamless steel pipe: It adopts hot rolling forming process, and its sizing is completed at around 8000C. The raw material composition, cooling conditions and cooling state of the rolls of the steel pipe have a great influence on its outer diameter. Therefore, it is difficult to control the outer diameter accurately, and the fluctuation range is large.
ERW steel pipe: adopts cold bending and sizing through 0.6% diameter reduction. The process temperature is basically constant at room temperature, so the outer diameter is accurately controlled and the fluctuation range is small, which is conducive to the elimination of black buckles;
2. Wall thickness tolerance
Seamless steel pipe: Produced by round steel perforation, the wall thickness deviation is large. Subsequent hot rolling can partially eliminate the wall thickness unevenness, but currently the most advanced units can only control it within ±5~10%t.
ERW steel pipe: hot-rolled coils are used as raw materials, and the thickness tolerance of modern hot-rolled strips can be controlled within 0.05mm.
3. Appearance
The outer surface defects of the blanks used in seamless steel pipes cannot be eliminated through the hot rolling process. They can only be polished off after the finished product is completed. The spiral path left after perforation can only be partially eliminated during the wall reduction process.
ERW steel pipes use hot-rolled coils as raw materials. The surface quality of the coils is the surface quality of ERW steel pipes. The surface quality of hot-rolled coils is easy to control and has higher quality. Therefore, the surface quality of ERW steel pipes is much better than seamless steel pipes. .
4. Ovality
Seamless steel pipe: Using the hot rolling forming process, the raw material composition, cooling conditions, and cooling status of the rolls all have a great impact on the outer diameter of the steel pipe. Therefore, the outer diameter control is difficult to accurately control, and the fluctuation range is large.
ERW steel pipe: It is formed by cold bending, so the outer diameter is accurately controlled and the fluctuation range is small.
5. Tensile test
The tensile performance indicators of seamless steel pipes and ERW steel pipes both meet API standards, but the strength of seamless steel pipes is generally at the upper limit and the plasticity is at the lower limit. In comparison, the strength index of ERW steel pipes is at its best, and the plasticity index is 33.3% higher than the standard. , the reason is that the performance of hot-rolled coils, the raw material of ERW steel pipes, is guaranteed by means of microalloying smelting, out-of-furnace refining, and controlled cooling and rolling; seamless steel pipes mainly rely on means of increasing carbon content, which makes it difficult to ensure strength and plasticity. a reasonable match.
6. Hardness
The raw material of ERW steel pipes - hot-rolled coils, has extremely high precision in controlled cooling and rolling during the rolling process, which can ensure uniform performance of all parts of the coils.
7. Grain size
The raw material of ERW steel pipe - hot-rolled strip coil is made of wide and thick continuous casting billet, which has a thick fine-grain surface solidification layer, no columnar crystal area, shrinkage cavity and looseness, small composition deviation and dense structure; in the subsequent rolling process Among them, the application of controlled cooling and controlled rolling technology further ensures the grain size of raw materials.
8. Anti-collapse test
ERW steel pipe is characterized by its raw materials and pipe making process. Its wall thickness uniformity and ovality are far better than those of seamless steel pipes, which is the main reason why its anti-collapse performance is higher than that of seamless steel pipes.
9. Impact test
Since the impact toughness of the base material of ERW steel pipes is several times that of seamless steel pipes, the impact toughness of the weld is the key to ERW steel pipes. By controlling the impurity content of raw materials, the height and direction of slitting burrs, the shape of the formed edges, the welding angle, and the welding speed , heating power and frequency, welding extrusion amount, intermediate frequency withdrawal temperature and depth, air cooling section length and other process parameters ensure that the impact energy of the weld reaches more than 60% of the base metal. If further optimized, the impact energy of the weld can be close to that of the parent metal. materials, resulting in seamless performance.
10. Blast test
The burst test performance of ERW steel pipes is much higher than the standard requirements, mainly due to the high uniformity of wall thickness and uniform outer diameter of ERW steel pipes.
11. Straightness
Seamless steel pipes are formed in a plastic state, and the straightness of the pipe end is relatively difficult to control with a single ruler (3 to 4 times a ruler for continuous rolling);
ERW steel pipes are cold processed and have online straightening in the reduced diameter state. In addition, they are infinitely multiplied, so the straightness is better.
12. The amount of casing steel used in 120,000 meters of footage
The wall thickness of ERW steel pipes is uniform and its wall thickness tolerance is negligible, while the control accuracy limit of the wall thickness difference of seamless steel pipes is ±5%t, which is generally controlled at ±5~10%t. In order to ensure that the minimum wall thickness can meet the standard requirements and performance, the only solution is to increase the wall thickness appropriately. Therefore, for casing of the same specifications and weight, ERW steel pipes are 5 to 10% longer than seamless steel pipes, or even more, which reduces the steel consumption of casing per 10,000 meters of footage by 5 to 10%. Even at the same price, ERW casing can virtually save users 5% to 10% of the purchase cost.
Read more: What are the grades of OCTG casing? or What is oil drill pipe?
Article source: https://article-realm.com/article/Business/66153-Difference-between-Seamless-casing-and-ERW-casing.html
URL
https://www.hu-steel.com/product89_991.htmlHunan Standard Steel Co., Ltd is a leading seamless pipe and welded pipe manufacturer & supplier serving diverse industries with multiple types, grades, diameters and lengths of pipe. For more, visit: https://www.hu-steel.com
Reviews
Comments
Most Recent Articles
- Feb 14, 2025 Connected TV Market Share, Size, Leading Players and Forecast to 2024-2030 by ElectroByte
- Feb 14, 2025 Guide To Pipe Flange Measurement by leah li
- Feb 14, 2025 Secure Self Storage Hamilton: Safe & Affordable by Evan
- Feb 13, 2025 What Is The Issue with Cutting And Replacing Boiler Tubes? by leah li
- Feb 13, 2025 Corrosion Resistance Competition of Seamless Pipes for Water Transport by Jane Tian
Most Viewed Articles
- 5464 hits Mist Sprayer Pumps Market Demands, Trends, Industry Analysis, Segmentation by 2032 by ellamrfr
- 4167 hits Flexographic Printing Plates Market Size, Share, Report 2024-32 by ellyse perry
- 1380 hits Plastic Bottles and Containers Market to Signify Strong Growth by 2024-2031 by mansi jain
- 1184 hits Glass Bottle & Container Market Size Analysis, Key Players and Forecast - 2031 by faraz pathan
- 1075 hits Catalase Market Size | Report 2024-2032 by ellyse perry
Popular Articles
In today’s competitive world, one must be knowledgeable about the latest online business that works effectively through seo services....
77886 Views
Are you caught in between seo companies introduced by a friend, researched by you, or advertised by a particular site? If that is...
33590 Views

Facebook, the best and most used social app in the world, has all the social features you need. However, one feature is missing. You cannot chat...
19070 Views

Walmart is being sued by a customer alleging racial discrimination. The customer who has filed a lawsuit against the retailer claims that it...
14914 Views
If you have an idea for a new product, you can start by performing a patent search. This will help you decide whether your idea could become the...
11668 Views
Statistics
Members | |
---|---|
Members: | 16307 |
Publishing | |
---|---|
Articles: | 66,152 |
Categories: | 202 |
Online | |
---|---|
Active Users: | 234 |
Members: | 3 |
Guests: | 231 |
Bots: | 1050 |
Visits last 24h (live): | 2990 |
Visits last 24h (bots): | 16037 |