How to update the firmware of a Linksys range extender?

1. Open a browser on the computer or laptop connected to the local network.

2. Type myrouter.local on the address bar of the browser and hit enter.

3. The default login window appears on the screen.

4. Type “admin” on the username tab and mention the password you set for the login window.

5. If you haven’t changed the default password yet, type “admin” in the password field.

6. Click login and you will be redirected to the default myrouter.local window.

7. From the main navigation panel, click on the Settings tab, then click on the Firmware update.

8. The firmware update page appears on the screen.

9. Scroll down the page and locate the Check online option and click on it.

10. If a new firmware is available on the screen, a dialogue box will appear on the screen prompting you to install it into the computer.

11. Click on the Upgrade and the installation process starts.

Note: During the installation process avoid activities such as opening a new tab, closing the browser, clicking on a hyperlink of the current browser, turning off your computer, launching a new browser and several others.

12. Wait for a few minutes to let the process complete.

13. Do not interrupt the update process by any means, it may lead to the failure of the firmware update process in the range extender.

14. When the process gets completed the range extender automatically reboot.

Note: If you don’t have an Internet connection, you can perform the Check online method as it requires the Internet totake action in this kind of process. You don’t require Internet in the manual process of updating the firmware but you must have already downloaded the firmware for the Linksys range extender.

How to change the Wi-fi password of a Linksys range extender?

The Wi-fi password of a range extender is utilized to allow authorized users to access the myrouter.local network. No user can access the network without typing a correct Wi-fi password in the provided field. While accessing the range extender for the first time, you need to type in the default Wireless credential on the provided field. You can access the default Wireless settings from the back of the device on its product label.

Follow the below steps to change the Wi-fi password of a Linksys range extender:

1. Open a browser on the computer or laptop connected to the local network.

2. Type myrouter.local network on the address bar of the browser.

3. Hit enter and the default Linksys router login appears on the screen.

4. Mention “admin” on the username tab and type the password you set during the setup process.

5. If you haven’t changed the login password type “admin” on the password field.

6. Both the login credentials fields are case-sensitive.

7. Note: Make sure you activate Caps lock before typing an uppercase letter and do vice-versa before typing a lower case letter.

8. Click login and the default myrouter.local appears on the screen.

9. Go to the Advanced tab, then select the Wireless settings page.

10. Scroll down the Wireless settings page and change the Network name from the SSID field.

11. You can change the Wi-fi password from the Network key field.

12. Make sure you are fulfilling all the requirements required to change the password.

13. If you want to create a hidden network, select the “Hide my SSID page” option.

14. It keeps unwanted users away from accessing the extender’s network.

15. Make sure you are fulfilling all the requirements required to change the Wi-fi password.

16. Click on the Save button when all the configurations are made.

Note: The credential field of a password is case-sensitive. For example, if you assign “PASSWORD96” as the Wi-fi password and you are typing “password96” while connecting to the range extender, you will be denied from connecting to the range extender’s network.

For more information: https://myrouterlocalcom.net/