Avoid safety problems during heat treatment of black steel seamless pipes

Nowadays, the heat treatment processing technology of seamless black steel pipe is widely used, and all walks of life are involved. For the processed products, its quality is controlled by the safe operation of heat treatment processing.

Safe operation during heat treatment of black steel seamless pipe:

1) When operating heat treatment processing, the equipment must be checked frequently, black steel seamless pipes and air pipes must not leak oil or air, and there should be no heavy oil at the bottom of the furnace;

2) Always pay attention to check whether the automatic power-off device for opening and closing the furnace door is in good condition, and whether the traffic lights on the power distribution cabinet are working normally;
 
3) When operating heat treatment processing, attention should be paid to not placing any metal objects on the heat treatment processing table to avoid short circuit;

4) When performing heat treatment, special attention should be paid to prevent poisoning caused by leakage of special gases;
 
5) Special attention should be paid to prevent electric shock when performing heat treatment processing operations on black steel seamless pipes. The floor of the operating room should be covered with rubber pads, and care should be taken to prevent cooling water from leaking on the floor and other places;

6) During heat treatment, some cooling measures should be taken to keep the temperature of the quenching oil tank below 80°C.

The heat treatment of black steel seamless pipe is widely used, so it is necessary to understand the safe operation of heat treatment, so as to ensure the quality of the product while ensuring its own safety.

The seamless pipe is made by perforating the whole round steel, and there is no welded steel pipe on the surface. Widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipes, automobile drive shafts, bicycle frames, and steel scaffolds used in construction, etc., use steel pipes to make ring parts. It can improve the utilization rate of materials, simplify the manufacturing process, save materials and processing man-hours.

Article source: https://article-realm.com/article/Finance/36862-Avoid-safety-problems-during-heat-treatment-of-black-steel-seamless-pipes.html