Cleaning method of cs seamless steel pipe inner wall

CS seamless pipe refers to a steel pipe that is perforated from a whole round steel and has no welds on the surface. The production process of this kind of steel pipe is relatively expensive. Although it is convenient to use without gaps, it will be very troublesome to clean, especially the inner wall of the seamless pipe is very difficult to clean. So, how to effectively clean the inner wall of cs seamless steel pipe?

Everyone knows that cs seamless pipes will have oil stains, oxide scales from welding and some other dirt during the production process. The outer wall is easier to clean. If it is oily, you can use organic solvent or lye to wash it. If it is rusty, use a special rust remover. If the cleanliness is high, ultrasonic cleaning is used. The principle of ultrasonic cleaning is that the drastic change in sound pressure when ultrasonic waves propagate in liquid causes strong air phenomenon in the liquid, generating millions of tiny cavitation bubbles per second. Under the action of sound pressure, these bubbles are rapidly produced in large quantities, and continue to explode violently, generating strong impact and negative pressure suction, which is enough to quickly peel off stubborn dirt.

If the steel pipe is relatively long and you have a sink, you can buy an ultrasonic vibrating plate and put it into the water for ultrasonic cleaning. If it is not too long, you can use an ultrasonic vibrating rod to insert it into the pipe for cleaning, and then wash away the dirt stripped by ultrasonic waves with running water. It is more troublesome to clean the inner wall of cs seamless pipe, but as long as you master the secret of cleaning, you don't have to worry about it.

When we clean the inner wall of cs seamless steel pipe, whether we use some weak acidic substances for cleaning, we need to pay attention to the content of acidic substances in it, because if the acidic substances are too strong, it may have a certain impact on our environment . So we need to wipe it with clean water after cleaning, so as not to leave residue on its surface. Some people have a misunderstanding, thinking that since strong acid cannot be used, then use strong alkali! But never use strong alkaline substances to clean oil stains directly, because it will make the surface sluggish. The correct way is to just place it in a dry environment, which can reduce corrosion.

In fact, for now, seamless steel pipes are widely used. Most of them are made by rolling ordinary carbon structural steel, low alloy structural steel or alloy structural steel. It is widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipes, automobile drive shafts, bicycle frames, and steel scaffolds used in construction, to make ring parts with steel pipes. Compared with welded steel tubes, it can improve the utilization rate of materials, simplify the manufacturing process, and save materials and processing hours.

Article source: https://article-realm.com/article/Finance/39760-Cleaning-method-of-cs-seamless-steel-pipe-inner-wall.html