How to set up a wireless WiFi repeater

If you are having trouble with your Wi-Fi connection, you can try to set up a WiFi repeater for your network to repeat and broadcast the signals coming from the router. The repeater will let you resolve the connectivity issues you are facing. The http //myrepeater.net quick setup guide you can follow to complete the setup process. Below, we are sharing some easy instructions that will help you to configure the repeater for your home network.

WiFi repeater setup: Steps to follow 

• Plugin your repeater into the power outlet.

• The power light on the device will turn to Green and Wi-Fi light without blinking.

• Now, connect it to your system using the ethernet cable or Wi-Fi.

• Once the repeater is connected, open any browser on your device and visit the myrepeater net website.

• When you visit the website, you will see the login page appearing on the screen. Here you have to enter the default username and password.  By default, the username and password for repeater setup is ” admin”.

• Once you have entered the information, hit the submit button.

• On the next screen appearing, go to the wizard section. From this section, you have to choose either AP mode or repeater mode.

• Once you have made the choice, the device will start scanning and show you the list of available Wi-Fi networks.

• From the list, select your Wi-Fi router names.

• Type the password and complete the repeater setup process.

• Click the “Apply” button.  The process will take around one minute to apply the settings.  After this, you can connect your devices to the repeater showing in the Wi-Fi list.

So, these are some simple steps that will let you setup myrepeater net for the home network without any trouble. If you want to set up the repeater using a WPS connection, follow the steps below.

• Setup repeater with WPS connection:

• Place your repeater and router in the same room.

• Plugin the repeater into the electric outlet.

• Press the WPS button on your router and within 2 minutes press the WPS button on your repeater. The WPS light on the devices will start blinking.

• The process will take around 20 seconds for the configuration.

• Once the WPS light is turned to solid, you can see the network name appearing in your WiFi list.

• Pick the network name and provide the password to get connected.

That’s all! Your myrepeater net setup using the WPS method is now completed. If you still have a doubt, get in touch with a team of professionals for expert advice.

Article source: https://article-realm.com/article/Product-Reviews/Music-Reviews/17110-How-to-set-up-a-wireless-WiFi-repeater.html