How to store steel sheet piles?

During the entire construction process, steel sheet piles are auxiliary equipments that must be used. Only after the steel sheet piles are well positioned can the subsequent filling, pouring, and support be better completed, so that subsequent projects can be more efficient. It should be noted that steel sheet piles are not disposable items during construction and can be recycled. Therefore, they need to be dismantled after use to prepare for storage for subsequent secondary use.

The use of steel sheet piles (such as Larson steel sheet piles) is becoming more and more common now. There are also some considerations about the storage of steel sheet piles. A good storage environment can effectively extend the service life of steel sheet piles. Therefore, at the steel sheet pile construction site, "three connections and one leveling" must be done. And according to the site conditions, if possible, make a concrete cushion on the ground first to facilitate construction. Drainage ditches and water collection wells should be set up around the site. The accumulated water should be extracted from the pile holes and can be discharged into the sewer after settling and meeting environmental protection requirements.

The excavation route at the steel sheet pile construction site should be smooth. Accurately lay out the lines according to the construction drawings, lay out the pile center line and pile diameter, carefully carry out technical review, and go through the visa procedures with the relevant departments before excavation of the pile body. Before digging a pile, four pile center control points should be drawn from the center of the pile to the four sides of the pile and marked with solid wooden piles.

What issues should we pay attention to when storing steel sheet piles?

1. When stacking, future construction must be taken into consideration, and the order, location, direction, and plane layout of the stacking of steel sheet piles must be appropriately determined. The first used part is placed on the outside, and the parts used later can be placed inward. This is to facilitate transportation when in use.

2. Different types of steel sheet piles should be placed separately and should not be stacked at will. They should be classified according to different specifications, lengths, etc., and the stacking places should be marked so that they can be easily found when used. Sheet pile.

3. Steel sheet piles should be stacked in layers. Generally, the number of each layer should not exceed 5. In addition, sleepers should be placed between each layer. The distance between sleepers is generally 3 to 4 meters, and the upper and lower piles must be ensured. The sleepers on each layer should be on the same vertical line, and the total height of the stack should generally not exceed two meters.

4. When stacking steel sheet piles, special machinery must be used for the operation, and manual work cannot be used to avoid accidents;

5. When tilting or stacking steel sheet piles on the ground, it is necessary to ensure that the pile heads are firm and cannot be pulled out or tilted;

6. Stacking operations must be carried out under safe passages and safety signs.

Article source: https://article-realm.com/article/Business/54000-How-to-store-steel-sheet-piles.html