Set up process of EX2700 and N300

Once you are connected with EX2700 /N300 you have to say goodbye to all the deadzones of your house. These extenders are the most convenient, different and easy to install. Tis not only extends the wifi coverage but also boosts your existing wifi network for all your mobile devices and connect the wired devices like smart TV or video games. It improve the range and speed as it has external antennas. The faster Ethernet port helps in connecting wired devices like blue-ray player, game console, TV etc.

Initial process to set up EX2700

• To setup the EX2700 first of all you have to go to the website mywifiext.net with the help of any web browser.
• Now you have to move to the New Extender Setup button and press enter.
• Then you have to move ahead as per the instructions prompted.
• Now move your devices to the spot where you receive poor signals and set your extender to a perfect place.
• Move your router closer to the extender if you do not receive signal properly.
• This way you can find a proper setting for your extender and enjoy your gaming surfing and videos.

Set up process of EX2700/N300 without WPS

• Plug in the extender EX2700 and N300 to a properly working electrical outlet.
• Make sure during the starting process you keep the extender and the router in the same room within the range.
• Wait for the power led light to be stable it will take a few seconds.
• Now connect your router to the Extender EX2700 andN300.
• Once it is connected the power led light would turn solid green.
• Now launch a web browser and you would be automatically connected to NetgearGenie.
• If you do not have Genie then type mywifiext
• You will be asked for user name and password.
• After entering the credentials you will be prompted to login page.
• Do as instructed. Congratulations your set is done.

By following the mywifiext.net EX2700 directions you can easily set up the extender and boost your wifi network, at your home or office. Make sure that while the setup process of the extender,it’s getting proper power supply and a good internet connection. All the username and information’s are properly entered without any spelling mistakes. All the cable wire should be not defective. And the most important thing is that the firmware of your extender must be updated and should be running through the latest version.

How to update the EX2700 Firmware

• Firstly turn on the N300 EX2700 extender.
• Now connect the Router with the Extender.
• Launch any web browser of your wish.
• And type www.mywifiext.net on the address bar and press enter.
• Now enter your username and password and login to your extender.
• Go to the setting menu and click the Firmware update option.
• Now click on the check button, and if there is any update available thenthe firmware update options page will be displayed before you.
• Now select your network press the yes button.
• It will take few seconds and your firmware will be updated.

Trouble shooting steps:

• Confirm the extender connected to the socket is working condition and not short circuited.
• Try to access high speed internet connection.
• Keep your extenders far away from Bluetooth devices, walls, microwave ovens, metal objects etc.
• Make sure you have entered the site to the URL correctly.
• First power-cycle the extender then start the setup process.
• Check the firm ware update and use the latest version.
• Use an updated browser to login mywifiext.
• Reset the extender to its default factory settings.
• Keep the router and the extender nearby.
• Keep your router updated.
• Check all the cables used are properly working and not defective.

These steps helps to setup your extender without any complication. Still you face problems regarding the setup process you can dial our customer care experts or email to support@mywifi-ext.net.

Article source: https://article-realm.com/article/Computers/Games/7113-Set-up-process-of-EX2700-and-N300.html