The LPC1768FBD100K NXP Semiconductors is a Cortex®-M3 microcontroller for embedded applications featuring high integration and low power consumption at 100MHz frequencies. Features include 512 kB flash memory, 64 kB data memory, Ethernet MAC, USB Device/Host/OTG, 8-channel DMA controller, 4 UART, 2 CAN channel, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, motor-controlled PWM, quadrature encoder interface, 4 general-purpose timers, 6 output general-purpose PWM, ultra-low power real-time clock (per battery), and up to 70 general-purpose input and output pins. The LPC1768 is pin-compatible with the 100-pin LPC2368 Arm7™ MCU. The LPC1768 NXP semiconductors peripherals include up to 512kB of flash memory, up to 64kB of data memory, Ethernet MAC, host, device, USB interfaces that can be configured as OTG, 8-channel general purpose DMA controller, 4 UART, 2 CAN channels, 2 SSP controllers, SPI interface, and 3 I2C interfaces.

Features of LPC1768FBD

• ARM Cortex-M3 processor (running at frequencies up to 100MHz in other versions). Memory
• LPC1788FBD208KComes with an 8-region memory protection unit (MPU).
• ARM Cortex-M3 Internal NVIC (Nested Virtual Interrupt Controller).
• In-Application Programming (IAP) capabilities with up to 512kB of on-chip flash program memory, enabling in-system programming (ISP) and in-application programming (IPA). A combination of enhanced flash memory accelerators, flash memory accelerators, and flash memory locations on the CPU local code/data bus deliver high code performance from flash.
• Up to two 16kB SRAM blocks with independent access paths for higher throughput. These SRAM blocks can be used as Ethernet, USB, and DMA memory and as general-purpose instructions and data storage. It can be used as a general-purpose instruction and data storage.
• It is an 8-channel general-purpose DMA controller (GPDMA) on the AHB multi-layer matrix that can be used in SSP, I2S, UART, A/D converters, and D/A converters peripheral circuits. It can be used for timer match signals, GPIO, and memory-to-memory transfers.
• inter-memory transfer
• The multi-layer AHB matrix interconnects a separate bus for each AHB master. The AHB master includes a CPU, a generic DMA controller, an Ethernet MAC, and a USB interface. This interconnect provides communication without arbitration delay unless the two masters are experimenting. Arbitration delay-free communication is possible if the two masters do not access the same slave simultaneously.

Trace port options

• The emulation trace module supports real-time tracing.
• Four low-power modes. Four power-saving methods: Sleep, Deep Sleep, Power Down, and Deep Power Down.
• 3 V single power supply (2.4 V～3.6 V). The temperature range at 40 °C～85 °C.
• Four external interrupt inputs can be set for edge/level susceptibility. All PORT0 and PORT2 pins
• A non-maskable interrupt (NMI) input.
• Clock output features that reflect the main oscillator clock, IRC clock, RTC clock, CPU clock, and USB clock.
• CPU clock and USB clock can be output.
• The wake-up interrupt controller (WIC) automatically allows the CPU to wake up.
• The CPU can wake up automatically from the priority interrupt that occurs during the clock stop during deep sleep.
• Power down and deep power down mode trace port options.
• The emulation trace module supports real-time tracing.

Applications

eMetering: It is used in eMetering its purpose is the measurement of the brightness of a subject. The shutter speed, aperture (F value), and ISO sensitivity are adjusted according to the subject’s brightness measured by the camera’s built-in photometric sensor to optimize the exposure.

Lighting: It is used in Lighting circuit

Industrial networking: It is used in Industrial networking, which includes LANs and WANs to transfer data between different systems in the same building. Ethernet is an example.

Alarm systems: It is used in Alarm systems. The alarm system is a mechanism, equipment, or device designed to detect unauthorized intrusion into a building or site or to alert the public to ongoing robbery.

White goods: It is also used in White goods

Motor Control: LPC2368 is also used in motor control to initiate, instruct, and classify intentional, voluntary movements.

Final Thoughts

You have to pick the best company to purchase the best electronic product, such as LPC1768FBD100K. Here one of the best electronic distributor companies, UCC INDU GmbH, offers high-quality services tailored to the automotive, medical, industrial, automation, communications, data technology and aerospace industries. UCC is electronic components distributor for everything from standard products, to specialty products that you source exclusively for your customers. UCC procure and market active, passive, and mechanical parts around the world, and maintains a large inventory to maintain customers’ normal electronic manufacturing services and original equipment manufacturing. You can go ahead with this company for the best electronic products. Customer satisfaction is one of the most important success factors for companies that focus on quality and service. That’s why UCC supply its customers with only high-quality parts from safe suppliers.

Article source: https://article-realm.com/article/Finance/30690-An-Introduction-of-LPC1768FBD100K-NXP-Semiconductors.html