braleyj

NXP is a global semiconductor company creating solutions that enable secure connections for a smarter world. NXP Semiconductors N.V. (NXP) is a Dutch semiconductor designer and manufacturer with headquarters in Eindhoven, Netherlands. NXP provides technology solutions targeting the automotive, industrial & IoT, mobile, and communication infrastructure markets.  UCC will expand and maintain a warehouse of NXP components to increase the availability of this manufacturer's products in Germany. The arrival of NXP Semiconductors LPC1778 and LPC1788 32-bit Microcontrollers at UCC's warehouse marks a major milestone in the world of integrated circuits. The LPC178x/7x adds a specialized flash memory accelerator to accomplish optimal performance when executing code from flash. The LPC178x/7x is targeted to operate at up to 120 MHz CPU frequency. LPC1788FBD208K is an ARM Cortex-M3 based microcontroller for embedded applications requiring a high level of integration and low ... Continue reading →

Der LPC1768FBD100K NXP Semiconductors ist ein Cortex®-M3-Mikrocontroller für Eingebettet – Anwendungen mit hoher Integration und niedrigem Stromverbrauch bei 100MHz. Zu den Leistungsmerkmalen gehören 512 kB Flash-Speicher, 64 kB Datenspeicher, Ethernet MAC, USB Device/Host/OTG, 8-Kanal-DMA-Controller, 4 UART, 2 CAN-Kanäle, 3 SSP/SPI, 3 I2C, I2S, 8-Kanal-12-Bit-ADC, 10-Bit-DAC, motorgesteuerte PWM, Quadratur-Encoder-Schnittstelle, 4 Allzweck-Timer, 6 Allzweck-PWM-Ausgänge, Echtzeituhr mit extrem niedrigem Stromverbrauch (per Batterie) und bis zu 70 Allzweck-Eingangs- und Ausgangspins. Der LPC1768 ist Pin-kompatibel mit der 100-Pin LPC2368 Arm7™ MCU. Die Peripherie des LPC1768 von NXP Semiconductors umfasst bis zu 512kB Flash-Speicher, bis zu 64kB Datenspeicher, Ethernet MAC, Host, Device, USB-Schnittstellen, die als OTG konfiguriert werden können, 8-Kanal-Allzweck-DMA-Controller, 4 UART, 2 CAN-Kanäle, 2 SSP-Controller, ... Continue reading →

The NRF24L01P is a single-chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurst™), suitable for ultra-low-power wireless applications. The nRF24L01+ is designed for operation in the worldwide ISM frequency band at 2.400 - 2.4835GHz. The Nordic nRF24L01+ is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01+ provides a true ULP solution enabling months to years of battery life from coin cell or AA/AAA batteries. The Enhanced ShockBurst™ hardware protocol accelerator offloads time critical protocol functions from the application microcontroller enabling the implementation of advanced and robust wireless connectivity with low cost 3rd-party microcontrollers. The nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF ... Continue reading →

The TPS62290DRVR devices are highly efficient synchronous step down DC/DC converters optimized for battery powered portable applications. They provide up to 1000-mA output current from a single Li-ion cell. With an input voltage range of 2.3 V to 6.0 V, the devices support batteries with extended voltage range and are ideal to power portable applications like mobile phones and other portable equipment. The TPS6229x devices operate at 2.25-MHz fixed switching frequency and enter power save mode operation at light load currents to maintain high efficiency over the entire load current range. The power save mode is optimized for low output voltage ripple. For low noise applications, the devices can be forced into fixed frequency pulse width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 μA. The TPS6229x devices allow the use of small inductors and capacitors to achieve a small solution size. The ... Continue reading →

When supply chain disruption hit, do you know how long your company could ride it out without shutting down? What if your entire industry is facing a disruption-related shortage? Do you know how quickly you could recover? These questions are especially relevant now, having spent the last two years struggling with global supply chain disruptions and massive shortages of everything from toilet paper and baby formula to electronic parts. Most industries are still recovering from the consequences, while the risk of further disruption lingers. Moving forward, understanding the risks and preparing for them to avoid the consequences is critical to managing supply chain disruptions. PINPOINTING THE CAUSES OF SUPPLY CHAIN DISRUPTION Supply chain interdependence is a fact of life. Unfortunately, there is no single root cause of supply chain disruption. Because our global supply chain has become a hugely complex network, it doesn’t collapse because a single link in a linear chain fails. ... Continue reading →

A3212ELHLT-T Description: The A3212ELHLT-T is a micropower ultra sensitive hall effect switch with latched digital output in 3 pin SOT2-3 package. Improved stability is made possible through chopper stabilization (dynamic offset cancellation) which reduces residual offset voltage normally caused by device over moulding, temperature dependencies and thermal stress. A 2.5V to 3.5V operation and unique clocking scheme reduce the average operating power requirements to less than 15µW with 2.75V supply. The A3212ELHLT-T includes hall voltage generator, small signal amplifier, chopper stabilization, latch and MOSFET output on a single silicon chip. Advanced BiCMOS processing is used to take advantage of low voltage and low power requirements, component matching, very low input offset errors and small component geometries. Small size, solid state reliability Supply current (IDD(AVG)) of 5.1µA at VDD = 2.75V 0.1% duty cycle Chopping frequency (fc) is 340KHz Superior ... Continue reading →

The NRF24L01P-R is a single-chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurst™), suitable for ultra-low-power wireless applications. The nRF24L01+ is designed for operation in the worldwide ISM frequency band at 2.400 - 2.4835GHz. The Nordic nRF24L01+ is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01+ provides a true ULP solution enabling months to years of battery life from coin cell or AA/AAA batteries. The Enhanced ShockBurst™ hardware protocol accelerator offloads time critical protocol functions from the application microcontroller enabling the implementation of advanced and robust wireless connectivity with low cost 3rd-party microcontrollers. The nRF24L01+ integrates a complete 2.4GHz RF ... Continue reading →

The LPC1768FBD100K NXP Semiconductors is a Cortex®-M3 microcontroller for embedded applications featuring high integration and low power consumption at 100MHz frequencies. Features include 512 kB flash memory, 64 kB data memory, Ethernet MAC, USB Device/Host/OTG, 8-channel DMA controller, 4 UART, 2 CAN channel, 3 SSP/SPI, 3 I2C, I2S, 8-channel 12-bit ADC, 10-bit DAC, motor-controlled PWM, quadrature encoder interface, 4 general-purpose timers, 6 output general-purpose PWM, ultra-low power real-time clock (per battery), and up to 70 general-purpose input and output pins. The LPC1768 is pin-compatible with the 100-pin LPC2368 Arm7™ MCU. The LPC1768 NXP semiconductors peripherals include up to 512kB of flash memory, up to 64kB of data memory, Ethernet MAC, host, device, USB interfaces that can be configured as OTG, 8-channel general purpose DMA controller, 4 UART, 2 CAN channels, 2 SSP controllers, SPI interface, and 3 I2C interfaces.   Features of ... Continue reading →