How do I log into my Wavlink wifi extender?

Wifi.wavlink.com allows the users to access the Wavlink log in page to set up and manage the wavlink extender .To access the Wifi.wavlink.com page, we need to connect our router to the extender and then and wifi enabled device through an Ethernet cable.We should always type http://Wifi.wavlink.com in the address bar of the web browser and then press Enter key.Then, on the Wavlink log in page ,we should enter log in details and tap on the log in button to complete the Wavlink log in process,.We should always keep in mind that the default log in Username and Password is admin.

And if we have changed the log in password, we should always use the new Password. We can also set up Wavlink extender without the User name and password .But it is always advisable to use the Wired connection while setting up of the router as it avoids the risk of being suddenly logged off when saving our changes.There can also occur troubleshooting problems while connecting to the Wavlink router .These problems can be easily resolved by firstly checking the WAN connections .We should check that the WAN cable is connected to the right port of the router which is labeled as WAN.Then we should check that wether we are connecting either by using WIfi network or a LAN cable, which is connected to the LAN labeled port of the router.

How to reset the resetting of the admin password:

The resetting of the admin password of the most Wavlink routers is simple and requires pushing a reset button ,located on the router itself , for 5 to 10 seconds .We should always keep in mind that of we are not satisfied with our current router and extender , we can replace it with wavlink wifi mesh system.We can also use the app set up 192.168.10.1 to access the wavlink extender login page. This can be done by entering the admin name and pAssword for our linking device. As mentioned above also there is an IP address for setting up of Wifi.wavlink.com,  which is http://Wifi.wavlink.com,  this is the simplest and stress free log in process .Wifi.wavlink.com connectsus to the IP address 192.168.10.1. These are also called the default addresses for the customizing of the wavlink wifi extender.It is advised that with the web based utility, it is easy to configure and manage the router.

This web based utility can be used on any windows such as Macintosh or UNIX OS with a Web browser, such as Microsoft of the Internet Explorer , Mozilla Firefox or Apple Safari Along with the setting up process of the Wavlink, it is also very much important to know how it works. It works with the help of WPS button on the extender. When it starts working, the signal LED turns into blue so as to indicate that the connection is successful. Sometimes the wireless  security mode of the device is not compatible with the wireless network , and in that case we should always disable our Wireless security.

This is especially important for the older devices and Windows Vista computers.Wifi wavlink set up also goes through a lot of trouble shooting problems,  which should be resolved as soon as possible. Ethernet cable is the main cable that should be connected to our device, In order to make the whole process .Once the set up process of Wavlink.com is done we should configure other features such as Access controls, time settings, Parental controls, traffic settings ,Smart connects and many other to gain the perform level of the range extender.We should also regularly keep on changing the password of our Wavlink so as to protect it from the access of unauthorized users .It should always be kept in mind that the Wifi password is always different from the log in password.The Wifi password is used to access the router's network , where as the log in password is used to interact with the Wifi.wavlink.com interface.

For more information: https://wifiiwavlink.com/

Article source: https://article-realm.com/article/Health-Fitness/25645-How-do-I-log-into-my-Wavlink-wifi-extender.html