Manju Gupta

Anxiety and Depression Treatment Market accounted for US$ 10.89 billion in 2020 and is estimated to be US$ 13.85 billion by 2030 and is anticipated to register a CAGR of 2.7%. Anxiety and Depression are two types of mood disorders. Anxiety creates feelings of nervousness, worry or dread. Feeling of sadness, reduced energy and feeling loneliness are symptoms of Depression. Anxiety & Depression lead to chronic fatigue, tiredness & lack of energy. Due to over stress and overthinking the human body cannot handle the emotions and begins to shut down which is manifested by extreme fatigue and tiredness. Covid-19 Pandemic has increased the mental illness among people. Thus, newly drugs, therapies in market are highly recommended.  The report “ Global Anxiety and Depression Treatment Market By Product (Antidepressant Drugs, SSRIs (Selective Serotonin Reuptake Inhibitor), SNRIs (Serotonin-Norepinephrine Reuptake Drug), Benzodiazepine, Devices and ... Continue reading →

CNG Dispenser Market accounted for US$ 203.43 million in 2020 and is estimated to be US$ 427.33 million by 2030 and is anticipated to register a CAGR of 7.8%. The calorific value and content of compressed natural gas (CNG) are both high. It is less polluting when used. It produces heat and is abundantly available all throughout the planet. It's one of the potential alternatives to the car industry's traditional energy sources. A CNG dispenser is a unique form of fuel dispenser found at gas stations. It is used to fill automobiles with compressed natural gas (CNG). The world's energy usage is steadily increasing. CNG dispensers are in high demand all over the world to meet the increased demand for energy in the automobile industry. The report " Global CNG dispenser Market, By Type (Fast Fill and Time Fill), By Flow Rate (Up to 15, Up to 50, and Up to 100 Kg/Min), By Distribution (Company Owned & Company Run, Company Owned & Dealer Run, ... Continue reading →

Atmospheric Water Generator Market accounted for US$ 2.5 billion in 2020 and is estimated to be US$ 14.05 billion by 2030 and is anticipated to register a CAGR of 19.0%. A device known as an atmospheric water generator (AWG) collects water from humid ambient air. Condensation is the process of extracting water vapour from the air by chilling it below its dew point, exposing it to desiccants, or pressurizing it. Because there is nearly always a little amount of water in the air that may be collected, AWGs are useful in situations where pure drinking water is difficult or impossible to get. Cooling and desiccants are the two most common ways used. The report " Global Atmospheric Water Generator Market, By Product (Wet Desiccation Machines and Cooling Condensation Machines), By Application (Industrial Applications and Residential Applications), and By Region (North America, Europe, Asia Pacific, Latin America, and Middle East & Africa) - Trends, Analysis and ... Continue reading →

Lubricating oil additives are used to make lubricants and functional fluids operate better. Each ingredient was chosen because of its potential to perform one or more specialised roles in combination with other additives. Selected additives are packaged for use with a particular base stock and application. The most common application of grease additives is in engine oils. Hydraulic fluids and gear oils are two other automobile applications. Grease additives are also found in industrial oils and metalworking fluids. The report " Global Lubricating Oil Additives Market, By Functional Type (Dispersants, Detergents, Anti-Oxidants, Anti-Wear Agents, Extreme Pressure Additives, and Viscosity Index Improvers), By Application (Engine Oil, Gear Oil, Process Oil, Industrial Oil, Hydraulic Fluid, and Metalworking Fluid), By Sector (Automotive and Industrial), and Region - Global Forecast to 2029’’ Key Highlights: Chevron Oronite Company LLC signed an agreement ... Continue reading →

The report "Global Feed Additives Market By Type (Amino acids, Phosphates, Vitamins, Acidifiers, Carotenoids, Enzymes, Mycotoxin detoxifiers, Flavors & sweeteners, Antibiotics, Minerals, Antioxidants, Non-protein nitrogen, Phytogenics, Preservatives, and Probiotics), By Livestock (Ruminants, Poultry, Swine, Aquatic animal, others (equine and pets)), and Region - Global Forecast to 2029".  Feed Additives market is projected to grow from US $36.20 Billion in 2020 to US$ 60.70 Billion by 2030. Rising incidence of food-borne zoonotic diseases is the major factor driving the target market growth. For instance according to cdc.gov zoonotic diseases are very common, around the world. Experts guesstimate that more than 6 out of every 10 known communicable diseases in people are spread from animals, and 3 from every 4 new infectious diseases in people are spread from animals. However, flaunching prices of raw materials such as maize, wheat, barley, ... Continue reading →

A shrimp can be defined as a small-sized marine crustacean with an elongated body, typically consumed as food, hence, is of high commercial importance. Shrimp species, such as white leg shrimp, giant tiger shrimps, gulf shrimps, blue shrimps, and royal red shrimps, are the most popular varieties that are consumed all over the world. As it is a rich source of calcium, iodine, vitamin D and B3, zinc, protein, and omega-3 fatty acids, it is widely used to aid weight loss, lower blood pressure, relieve eye fatigue, improve bone and brain health, and reduce the risk of developing cardiovascular disease. Growth in the demand for seafood products is a major factor driving the market of a wide variety of shrimp species. Globally, consumers are changing their food habits by opting for healthier food products such as shrimps, salmon and tuna. Seafood is considered a healthy source of animal protein over other meat products, which is enhancing the global demand for shrimps. Growing ... Continue reading →

The gypsum market accounted for US$ 2.34 billion in 2020 and is estimated to be US$ 4.83 billion by 2030 and is anticipated to register a CAGR of 7.50%. Gypsum is a soft sulfate mineral composed of calcium sulphate dihydrate, with the formula CaSO4·2H2O. It widely mined and is employed as a fertilizer and because the main constituent in many sorts of plaster, blackboard/sidewalk chalk, and drywall. A huge fine-grained white or lightly tinted sort of gypsum, called alabaster, has been used for sculpture by many cultures including Ancient Egypt, Mesopotamia, Ancient Rome, the Byzantine Empire, and therefore the Nottingham alabasters of Medieval England. Gypsum also crystallizes as translucent crystals of selenite. It forms as an evaporate mineral and as a hydration product of anhydrite. The report " Global Gypsum Market, By Type (Natural Gypsum and FGD Gypsum), By Application (Agriculture, Construction, Medical, and Art), and By Region (North America, ... Continue reading →

Insulated Water Bottles Market accounted for US$ 1.43 billion in 2020 and is estimated to be US$ 2.20 billion by 2030 and is anticipated to register a CAGR of 4.50%. Insulated water bottles are considered "non-essential," they have received some criticism in this regard. Due to a scarcity of trucks, manpower, and state regulations limiting the global epidemic, the transportation of reusable water bottles from one channel node to another is still constrained. The report " Global Insulated Water Bottles Market, By Type (Plastic, Metal, and Glass), By Application (Home Use, Sports, and Travel), and By Region (North America, Europe, Asia Pacific, Latin America, and Middle East & Africa) - Market Trends, Analysis, and Forecast till 2029’’ Key Highlights: In February 2019, Cove released a reusable water bottle made completely of biodegradable materials that looks and feels like ordinary plastic that can be dissolved. Newell Brands and Nalge Nunc ... Continue reading →

Tobacco Market accounted for US$ 921.21 billion in 2020 and is estimated to be US$ 1176.35 billion by 2030 and is anticipated to register a CAGR of 3.0%.  Tobacco is an American natural plant that was formerly one of the most significant crops for American farmers. It is one among the world's most extensively used addictive substances. Tobacco refers to any of the Nicotiana species (especially Nicotiana tabacum), which are native to tropical America and widely farmed for their leaves, which are dried and processed for use in pipes, cigarettes, and cigars. It's also chopped into chewing tobacco, ground into snuff or dipping tobacco, and used in a variety of other less popular formulations. The report " Global Tobacco Market, By Product (Combustible Tobacco Products and Smokeless Tobacco Products), By Application (Cigarette, Cigars, and Others (Chewing, Dipping, Snuff, and Snus Tobacco), and By Region (North America, Europe, Asia Pacific, Latin America, ... Continue reading →

The report " Online Grocery Market in India, By Unorganized (Kiranas (Traditional Variety Stores), Street Markets, and Kiosks), By Organized (Supermarkets, Hypermarkets, Specialty Chains, Department Stores, and E-Grocery Retailers) - Trends, Analysis and Forecast till 2030”. Key Highlights: In 2018, Grofers India Pvt. Ltd. operates through 30 stores and 3 distribution centers in Mumbai, Pune, and Bengaluru for the convinces of the online customers Analyst View: Market Growth Drivers High investment and customer acceptance Evolving dietary patterns and supporting scientific findings Key Market Insights from the report:      The market report has been segmented on the basis of unorganized, organized, and region. By unorganized, the global market is sub divided into kiranas (traditional variety stores), street markets, and kiosks By organize, the target market is classified into supermarkets, hypermarkets, specialty chains, department ... Continue reading →

Energy Drink Market accounted for US$ 57.4 billion in 2020 and is estimated to be US$ 114.70 billion by 2030 and is anticipated to register a CAGR of 7.3%. Consumers can get a boost of energy from energy beverages. Energy drinks boost not just physical and mental performance, but also mental attentiveness. Some energy drinks are sold as beverages, while others are sold as nutritional supplements. Caffeine, taurine, guarana, and B vitamins are all common constituents in energy beverages. Caffeine is used to provide stimulation, and taurine is needed for cardiovascular and skeletal muscle development. Carbonation is optional in energy drinks. Powdered energy drinks can also be blended with water or juice. The report " Global Energy Drink Market, By Product (Alcoholic and Non-Alcoholic), By Product Type (Non-organic, Organic, and Natural), By Target Customer (Teenagers, Adults, and Geriatric Population), By Distribution Channel (On-trade and Off-trade Direct Selling), ... Continue reading →

The report "Global Food Supplements Market, by Type (Minerals, Vitamins, Prebiotics, Amino Acids, and Proteins), by End-Users (Men, Women, Children, and Senior Citizen), by Form (Pills, Tablet, Capsules, Powder, Liquid, and Softgels), and Region - Global Forecast to 2029"  Food supplements market is projected to grow from US$ 133.1 billion in 2020 to US$ 281.8 billion by 2029. The global food supplements market is expected to register moderate growth over the forecast period. This is attributed to increasing prevalence of strokes, heart attacks, obesity, diabetes, and atherosclerosis which leading to create demand for healthy diet, coupled with rising incidence of mal-nutrition in emerging economies has increased the demand for food supplements across the globe. Key Highlights: In June 2018, Kora Organics has launched “Noni Glow Skinfood Supplement”. This is designed to support daily beauty and wellness. Key Market Insights from the report:  ... Continue reading →

Pressure Vessel Market accounted for US$ 41.23 billion in 2020 and is estimated to be US$ 63.62 billion by 2030 and is anticipated to register a CAGR of 4.50%. Pressure vessels are used in manufacturing industry in order to hold liquids and gases at high pressure. Pressure vessel has high pressure with high temperature. Sometime flammable fluids or highly radioactive material is present in pressure vessel. It has to be design carefully to cope with the operating temperature and pressure. Pressure vessels are designed primarily based on diameter and thickness of their cylinder portion. These vessels are manufactured by using stainless steel and assembled by welding. Operation and manufacturing of pressure vessel is highly governed by authorities supported by legislation. The report " Global Pressure Vessel Market, By Material (Steel Alloy, Other Alloy, and Composites), By Product Type (Boiler, Nuclear Reactor, Separator, and Others), By End Use Application (Oil and ... Continue reading →

Iron Market accounted for US$ 214.7 billion in 2020 and is estimated to be US$ 1236.39 billion by 2030 and is anticipated to register a CAGR of 10.40%. Steel manufacture is the most common use of iron ore. It's essentially an iron alloy with carbon and additional metals including boron, manganese, nickel, titanium, chromium, molybdenum, and vanadium as additives. These additional metals give steel different properties, allowing it to be used in a variety of applications. Hematite, limonite, magnetite, goethite, and siderite are some of the most important ores. Hematite and magnetite, among these several ores, are iron-rich, containing more than 60% iron. Pig iron, wrought iron, and cast iron are the three types of iron based on carbon content. Pig iron has already controlled the market, and it is likely to do so again over the projection period. The report " Global Iron Market, By Type (Physical Production, Chemical Production, and Mechanical Production), ... Continue reading →

The report "Global Meat Substitute Market, By Type (Tofu Based, Tempeh Based, Textured Vegetable, Protein Based, Quorn Based, Seitan Based, and Others), By Source (Soy, Wheat, Mycoprotein,             Others (Milk, Rice, Pulses)), By Category (Frozen, Refrigerated, and Shelf-Stable), and Region - Global Forecast to 2029"  Meat substitute market is projected to grow from US$ 1.8 billion in 2020 to US$ 5.0 billion by 2029. Increasing health concerns and growing preference for vegetarian diets among individuals across the globe are major factor for growth of the global meat substitute market. In addition, increasing incidence of obesity due to processed meat consumption and several disease outbreaks in animals are some among the major factors expected to boost growth of the global meat substitute market in the near future. Furthermore, increasing disposable income of individuals in order to fulfill ... Continue reading →

Baby Food Market accounted for US$ 61.36 billion in 2020 and is estimated to be US$ 116.72 billion by 2030 and is anticipated to register a CAGR of 6.7%. Baby food is designed primarily for toddlers and infants aged 4 months to 3 years. Baby food is soft and easy to eat, as well as helping to meet the nutritional needs of toddlers and newborns. Baby food comes in a variety of forms, including powder, solid, and liquid. Cereals are one type of solid baby food. Powdered baby food, on the other hand, is inexpensive and may be fed to an infant by mixing it with water. It's also available in a variety of flavours, shapes, and flavours. These infant food items are readily available and can be obtained directly from manufacturers. The report " Global Baby Food Market, By Product Type (Ready to Feed Baby Food, Dried Baby Food, Infant Cereals, Infant Milk Formula, and Others), By Form (Powder, Liquid, and Solid), by Source Type (Inorganic and Organic), By Distribution ... Continue reading →

The report "Global Real Estate Market, By Type (Selling and Rental Activities, Leasing of Property and Condominiums for Commercial, Personal Household Usage, and Brokerage Services), and By Region (North America, Europe, Asia Pacific, Latin America, and Middle East & Africa) - Trends, Analysis and Forecast till 2030"  Real estate market accounted for US$ 4,451 billion in 2018 with a CAGR of 1.20%. Block chain for real estate industry, crowd funding investments in real estate and technology to improve agent services are the major trends witnessed in the global real estate market. Factors such as the increasing demand for housing real estate space, rapid urbanization through migration in search for better amenities. Key Highlights: On January 20, 2020 Stuart McCann to Join CBRE as Head of International Capital, Pacific and Southeast Asia. On July 11, 2019 New World Development Company China Land Limited is committed to developing the Greater Bay Area with a ... Continue reading →

Industrial Automation Market accounted for US$ 133.43 billion in 2020 and is estimated to be US$ 274.40 billion by 2030 and is anticipated to register a CAGR of 7.50%. Factory automation standardizes industrial processes and provides consistent, high-quality outcomes; as a result, it is in high demand in businesses that require dependable, high-quality manufacture. Furthermore, it meets the demand for mass production in sectors because to qualities such as little human interaction, increased quality, and lower labor expenses, all of which result in a low overall operational cost. The increased adoption of the Industry 4.0 movement and IoT-enabled smart technologies has boosted demand for factory automation. However, the rise of factory automation is hampered by excessive investment, a scarcity of personnel, and a lack of security awareness. The report " Global Industrial Automation Market, By Automation Type (Distributed Control System (DCS), Programmable Logic ... Continue reading →

Growth in scope of application for the product in footwear and growing awareness about animal rights along with stringent laws regarding the usage of real leather is expected to further boost the product demand  The synthetic leather market accounted for US$ 29.2 billion in 2019 and is estimated to be 95 billion by 2025 and is anticipated to register a CAGR of 5%. The report. "Global Synthetic Leather Market, By Type (Polyurethane (PU) Synthetic Leather, Polyvinyl Chloride (PVC) Synthetic Leather, and Bio Based Leather), By Application (Furnishing, Automotive, Footwear, Bags & Wallets, Clothing, and Others), and By Region (North America, Europe, Asia Pacific, Latin America, and Middle East & Africa) - Trends, Analysis and Forecast till 2030”. Key highlights: On July 31, 2019, Asahi Kasei Corporation declared that it would operate regional headquarters in Thailand in order to increase its presence in the market in ASEAN. The company also ... Continue reading →

The report "Global Plastic Recycling Market, By Material (PET, PP, PVC, and Others), By Recycling Process (Mechanical and Chemical), By Source (Bottles, Films, Foams, and Others), By Application (Packaging, Building and Construction, Automotive, and Other), and Region - Global Forecast to 2030"  The plastic recycling market accounted for US$ 42.6 billion in 2020 and is estimated to be US$ 79.9 billion by 2030 and is anticipated to register a CAGR of 6.6%. Growing awareness associated with energy saving benefits in the manufacturing of recycled plastics over virgin plastics is major factor driving growth of the global plastic recycling market. In addition, huge demand for plastics across various packaging industries and negative environmental impact of plastic disposal is propelling growth of the global plastic recycling market. Government support to use recycled plastics in developed countries and increasing use of recycled plastic in ... Continue reading →