Health & Fitness

With the growing acclaim of the new compact X-Lite form factor, FrSky is introducing this upgraded version. The Frsky Transmitter X-Lite Pro and S versions combine all the benefits of the preceding design with the features of our full-sized radios, along with the newly developed ACCESS (Advanced Communication Control, Elevated Spread Spectrum) protocol. Frsky Transmitter X-Lite Pro Specifications Number of channels: 24 channels Internal RF module: ISRM-P Weight: 328g / 390g (with battery) Operating voltage range: 6.0 ~ 8.4V Operating current: 190mA@7.4V Operating Temperature: -20°C ~ 60°C (-4°F ~ 140°F) Backlit LCD resolution: 128*64 Model memories: 60 models (expandable by micro TF card) Micro USB interface: supports 2S Li-battery balancing charge Color: navy blue Compatibility: ACCESS and ACCST D16 mode receivers Frsky Transmitter X-Lite Pro Features Ergonomic and compact design MC12 Lite all-metal CNC digital hall sensor gimbal Upgraded RF module with installed ... Continue reading →

The 900MHz R9 MM-OTA receiver implements the ACCESS protocol and brings the user improved performance and features. The Long Range Receiver R9 MM-OTA supports wireless firmware updates over the air making binding to receivers even easier. As well as the convenience of checking the current receiver firmware version. The R9 MM’s compact form factor design is also carried over to the OTA version, and the Long Range Receiver R9 MM-OTA supports inverted S.Port as well.  Long Range Receiver R9 MM-OTA SPECIFICATIONS Dimension: 16*10*2.8mm (L×W×H) Weight: 0.7g (without antenna) Number of Channels: Non-LBT Version: 4/16CH (Telemetry) LBT Version: 4/16CH (Telemetry) / 4/16CH (No Telemetry) Operating Voltage Range: DC 3.5V – 10V Operating Current: 100mA@5V Operating Range: Up to 10km or above Compatibility: R9M Lite/R9M/R9M 2019 with ACCST firmware                       R9M Lite/R9M Lite Pro/R9M 2019 with ACCESS ... Continue reading →

The FrSky TFR6-A is a high quality 7 channel receiver from FrSky that is compatible with all Futaba FASST series radios. The FrSky TFR6-A features end pins to enable even more compact installation.The FrSky TFR6-A supports two selectable failsafe setting options, either set failsafe positions for each channel on your transmitter, or set the failsafe on the FrSky TFR6-A.The failsafe function is supported for all channels.  FrSky TFR6-A Features: Light weight and compact End mounted connectors Two selectable failsafe setting options FrSky TFR6-A Specifications: Number of Channels: 7 Dimension: 37 x 22 x 8mm Weight: 7.8g Operating VoltageRange: 3.5V~10V Operating TemperatureRange: -10°C~80°C FrSky TFR6-A Compatibility:   FASST 2.4G: Air Systems (7CH Mode/Multi Mode) 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ etc. Futaba TF Modules: TF-8M, TF-14M What's in the Box: 1 x TFR6-A 2x Short tool 1 x Manual Continue reading →

  When young people choose a hair system, what styles are recommended? Today we are going to share with you our expert's opinion on this. When it comes to choosing a hair system, what's the difference between young people and old people? The two most important factors are the hair density and hair color. Hair Density   For young people, actually they can choose any of these densities from 50% to 180%. First, choosing thick hair or thin hair is more a personal preference thing. If you like thick hair, then choose high density hair. If you like thin hair, then choose low density. Especially when you just start to wear a hair system, people prefer to choose a low density first and gradually increase to higher density. In this way, it is easier for them to accept the hair look. It is a big change from no hair to having hair after all. So a gradual hair density change is a route most of people choose to take. When you are in the stage of getting used to wearing a hair ... Continue reading →

  When young people choose a hair system, what styles are recommended? Today we are going to share with you our expert's opinion on this. When it comes to choosing a hair system, what's the difference between young people and old people? The two most important factors are the hair density and hair color. Hair Density   For young people, actually they can choose any of these densities from 50% to 180%. First, choosing thick hair or thin hair is more a personal preference thing. If you like thick hair, then choose high density hair. If you like thin hair, then choose low density. Especially when you just start to wear a hair system, people prefer to choose a low density first and gradually increase to higher density. In this way, it is easier for them to accept the hair look. It is a big change from no hair to having hair after all. So a gradual hair density change is a route most of people choose to take. When you are in the stage of getting used to wearing a hair ... Continue reading →

  A male toupee is a partial wig or hairpiece made of synthetic or natural hair. Normally it is worn by men for theatrical purposes as well as to cover partial baldness. Though these hairpieces and toupees are mainly used by male wearers but some women can also use them to cover their partially exposed scalp or to lengthen their existing hair. How much does a male toupee cost? The cost of hair pieces for men depends mainly on the type of hair used in them. They are made by using natural human hair as well as synthetic hair. The life expectancy of natural human hair is more than the pieces of synthetic hair. The synthetic hair allows the wearer to style and color the pieces according to the hair he already has. male toupee Cost of the hairpiece with human hair The cost of a partial wig made of human hair can be quite higher than that of synthetic hair. You can use it for a long time if you use it carefully. Moreover, it will not be harmful to your scalp if attached to it safely. ... Continue reading →

  If a stock hair system cannot meet your needs, then how to place a men's custom made toupee order? A lot of people don't know how to do that and today we are giving you a detailed demonstration. Generally speaking, when you place a custom order, you need to tell the company you want to buy from below information: Hair system base construction, base material, base size, hair material, hair density, hair color, hair direction and hair texture. This information seems quite a lot to people and we make it easy for you. On lavividhair.com, we created a page called Custom Toupee and you can check the detailed illustration of each factor and you can choose from the options available for each factor. The page link is https://www.lavividhair.com/custom-toupee.  This is the reason why we design this page in this way: On the first page, we demonstrate all the base options available. The purpose of this page is to show you the main 4 base materials of poly, lace, mono and silk ... Continue reading →

With regards to the RC drone which have been created for aerial photography, some features tend to be more important than these, so that they must be taken into consideration. In almost any situation, you'll have to have some understanding about individuals features, so that you can select the right unit. Fortunately, we find the best planes rather individuals and every one of them have these functions. The standard. Because of the fact these RC drone can achieve high-top speeds, a excellence of the unit is required. It should be in a position to withstand rough landings and smaller sized crashes. Only an RC plane that may withstand a great choice also it should be taken into consideration. Many of them are manufactured from EPO, so that they are durable and they must be the best. For additional info on high-quality RC drone, chek out our article about best RC plane models. A video camera is one thing that has to be taken into consideration too, the way it is among the most ... Continue reading →

The S8R is a FrSky 8 and 16 channels receiver built-in 3-axis gyroscope and 3-axis accelerometer sensor module. For conventional Fixed Wing and Glider Models it will support stabilization, automatic level, hover and Knife-edge flight modes, for Delta Wings or flying wings and V-tail models it supports stabilization and automatic level flight modes. You can edit the type of model and manipulate all these features via the Frsky Receiver S8R. Config or S8R. lua. The Frsky Receiver S8R can also be used as a standard 8 channel X series receiver if it is required. Tip: Use the S8R with 3-axis stabilization as a slave receiver with the RB-10 to give you that extra peace of mind by buying you precious time to bring your model home. Frsky Receiver S8R Specification：   Dimension: 46.47×26.78×14.12 mm (L×W×H)   Weight: 14g   Number of Channels: 8/16CH (1-8ch from conventional channel outputs, 1-16ch from SBUS output)   With RSSI PWM output on board: ... Continue reading →

Have you ever imagined what you will do if your device or data gets stolen or lost? Are you having a place to keep your data and device intact and theft-poof? Here in this article, you will learn the basics to secure and protect your data and device from the frauds and scams on the Internet’s landscape. If you are working in a company and your mobile gets stolen then there can be huge changes that the data related to your workspace can be at risk. There might be some valuable information related to your company that is useful for the scammers and hackers to misuse. So there are some basic tips and tricks to protect your device and data and block the measures to the data breach. Before, we talk about the tips and tricks it is important to consider downloading comprehensive security software such as McAfee from McAfee.com/Activate.  Apart from securing your data and device by McAfee security you need to consider a few tips that are considered in this article. Tips and tricks ... Continue reading →