Basic Steps to Setup 123 HP com OJ4650 Printer

HP OJ4650 printers allow users to print documents from their smartphones and other remote devices with the help of the Print feature. If you are looking for a complete guide of 123 HP Com OJ4650 Printer Setup, then this blog is for you. The 123 hp com oj4650 printer is one of the most economical multifunctional devices available in the market that allows the user to print approximately 11 pages per minute. This printer is very easy to maintain and provides high-quality prints at an extremely low cost. Let’s get started with the 123 hp com oj4650 printer setup procedure.

Steps to set up 123 hp com oj4650 printer

If you are willing to learn the 123 hp com oj4650 printer setup process then you need to follow the below steps:

Step 1: Initial setup of 123 hp com oj4650 printer

• First of all, you need to connect your HP OJ4650 printer to the power outlet with a power cord that comes along with the printer.
• Now, press the power button on the control panel to turn on the printer.
• Then, you need to wait for the printer to initialize.
• After that, the control panel will display the instructions to set the preference such as language, region, date and time. You need to press the confirm button for all the instructions.
• Thereafter, install the ink cartridges.
• To install the ink cartridges, pull out the cartridge access area tray and let the slots align up to place the ink cartridges.
• Now, remove the ink cartridges from their packages and place them in their respective areas and then close the cartridges access area tray.
• Next, you need to press the ok button.
• After that, your 123 hp com oj4650 printer will ask you to load the paper in the paper tray.
• After placing the paper, you need to adjust the slider width guide and then click on the yes button.
• Now, your OJ4650 printer will print an alignment page that you need to place on the scanner to run through the alignment.
• Then, lift the lid of the scanner glass and press the ok button.
• The “Scanning was successful” message will display on the control panel, after that, you can click on the finish button.

Step 2: Configuration of 123 hp com oj4650 printer

• First of all, make sure that your printer is in an active state and then check the USB port.
• When your screen prompts to attach the USB cable then connect your printer to the computer with a USB cable.
• Now, you need to launch the web browser and visit 123.hp.com/oj4650 and then enter the printer model to select the correct printer drivers for your printer.
• Based on your HP printer model number, the “HP easy start” will download.
• After downloading the HP easy start app, you need to follow all the on-screen guidelines.

So, that’s all about 123 HP Com OJ4650 Printer Setup. The setup process of the 123 hp com oj4650 printer is very easy. You just need to follow the above steps. Still, if you are facing any issues with the process, then feel free to contact us.

Article source: https://article-realm.com/article/Health-Fitness/17527-Basic-Steps-to-Setup-123-HP-com-OJ4650-Printer.html