The Influence of CNC Turning and Milling Machining on Turning Efficiency

The cutting efficiency of CNC lathes will be affected by human factors, environmental factors and the machine tool itself. Let's talk about the influence of cutting amount and cutting tools on CNC lathe processing among many factors.

Reasonable cutting amount can improve the efficiency of CNC lathe. When the laser cutting speed is increased by 10 times and the feed rate is increased by 20 times, far beyond the traditional cutting forbidden zone, the cutting mechanism has undergone a fundamental change.

The result of CNC turning and milling combined processing is: the metal removal rate per unit power is increased by 30% to 40%, the cutting force is reduced by 30%, the cutting life of the tool is increased by 70%, and the cutting left on the workpiece is greatly reduced. Heat, cutting vibration almost disappeared; cutting processing has taken an essential leap. According to the current situation of CNC lathes, increase the feed per tooth, improve productivity and tool life.

The effect of CNC milling and turning compound machining of ear cutters on CNC lathes is like the effect of wheels on automobiles. The material used to make the tool must have high high temperature hardness and wear resistance, necessary bending strength, impact toughness and chemical inertness, good manufacturability (wire cutting, metal forging, sueface treatment, etc.), and not easy to deform. A good tool can improve the efficiency of machining and the accuracy of the workpiece to be cut.

Other factors such as power supply, familiar operation, reasonable materials and other factors will affect the processing of CNC lathes.

Copyright notice: This article comes from https://be-cu.com/

Article source: https://article-realm.com/article/Sports-Recreation/22173-The-Influence-of-CNC-Turning-and-Milling-Machining-on-Turning-Efficiency.html