Mannequin head should be carefully protected during use

Mannequin head should be carefully protected during use. When installing and removing mannequin head, place parts of mannequin head on soft objects as much as possible to avoid being hurt or scratched due to excessive force. Special attention is paid to mannequin head. The joints of parts are most likely to have gaps due to collisions.

When placing mannequin head in the mall, try to place them where they are not easily tripped or tripped by customers, because mannequin head are fragile. If they fall down, the accessories of each interface are easy to fall off, making the mannequin head unusable.

Try not to place the mannequin head in a place where the direct sunlight or the spotlight is too strong. If the light is often irradiated, the paint on the surface of the clothing mannequin head will change color.

If you accidentally soil your model, you can clean it in the following ways.

1. When the surface of the model's props is white, if it is a recently used model, you can use a clean wet cloth or eraser to gently wipe it. When using the eraser, pay attention to gently wipe it; if it has been used for a long time, you can use a clean Clean with a damp cloth and a little detergent.

2. When the surface of the clothing mannequin head is other colors, the most common is to use rubber and detergent. However, there are some stubborn ones that cannot be cleaned. At this time, you can consider cleaning with universal water. Pay attention to the concentration of universal water. Too strong will cause the color to fade. Be sure to add water for dilution and clean up.

Article source: https://article-realm.com/article/Sports-Recreation/9725-Mannequin-head-should-be-carefully-protected-during-use.html